Korin White #2 Hongasumi Yanagi 10.5"

SKU: HKR-SHYA-270
Size: 10.5" (270 mm)
$340.00
Carbon Knife Acknowledgement
Click here to read about carbon knife care.

In Stock

Add Accessories

Check the box for each accessory you want.


For knife sets: All applicable knives in set will be converted for a flat rate.

Traditional Japanese Knife Gift Wrapping $10.00
Custom Knife Engraving (All Sales Final) $15.00

Engraved knives cannot be returned or exchanged. For knife sets, all knives will have same engraving at one flat rate.

  • Western style knives: Max 15 characters
  • Traditional knives: Max 9 characters

Features

Style:Yanagi

Steel Type:Carbon steel (CAUTION: MOISTURE AND ACID CAUSES RUST AND DISCOLORATION)

Steel Material:White Steel #2

Classification:Hongasumi

Saya Cover:Magnolia Wooden Cover Included

Knife Bevel:Single Sided

Handle Material:Magnolia Wood

Bolster Material:Water Buffalo Horn (Bolsters are made from natural horn therefore colors may vary)

HRC:61

Knife Weight in grams:

Blade Width (Widest part of the blade) in inches:

Spine Width (Widest part of the spine) in inches:

Handle Length in inches:

Back
About Korin Shiro-ko Hongasumi
The Korin Shiro-ko Hongasumi knives are forged in Japan from a combination of white carbon steel #2 and soft iron steel, then handled with magnolia wood and a water buffalo bolster. White steel’s pure carbon content allows for the sharpest cutting edge. The main difference between the kasumi and hongasumi line is found in the crafting process. More steps, higher level craftsmen, and greater attention to detail are involved when crafting hongasumi knives, therefore are more refined than kasumi knives.
About Korin
Drawing from a tradition of Japanese craftsmanship and meticulous attention to detail, the collections at Korin showcase exceptional sharpness and time-tested durability. We are dedicated to bringing the highest quality Japanese knives to your kitchen, so you can experience the unparalleled quality of Japanese craftsmanship in your home or restaurant.
Purpose of Yanagi
The yanagi is used to slice boneless fish fillets into sashimi and toppings for sushi. The graceful, long and thin blade is designed to cut slices in one drawing stroke, which applies minimal pressure on the flesh of the fish to avoid stress and cell destruction. Different cutting techniques are used with the yanagi to enhance the aesthetics and the flavors of the fish. There are several variations of fish slicers that are all used in different situations and regions, however the yanagi style is the most widely used. Originated in Kansai (Osaka) region.


CAUTION: Moisture Causes Rusting and Discoloration


Back


For Left-Handed Customers

  • Left-handed blades must be special ordered from Japan, and will cost 50% more than the right-handed blades. Due to how each traditional Japanese knife is handmade by right handed craftsmen, it will take 4 to 6 weeks to forge and deliver.

Back

General knife care tips and warnings


  • Never wash knives in the dishwasher
  • This is not stain resistant. It will rust and discolor after cutting acidic ingredients or if one leaves it wet.
  • Improper care will result in chipping.
  • Please wipe knives dry after use to prevent rusting. Korin recommends wiping carbon knives with tsubaki oil to keep moisture off the knife.
  • Western style knives sold at KORIN have significantly thinner blades than typical Western knives. Use of honing steels or sharpening machines may result in chipping.
  • We advice all customers to always use sharpening stones to sharpen or hone knives.


Caution

Please be cautious when inspecting carbon knives with wet hands after purchase. We ask customers to inspect all knives prior to using, and will not accept returns on damaged goods. In the event you receive a rusted knife, please call customer service within 48 hours, and we will be happy to assist you.


For more information, please check our pages on different types of sharpening stones or sharpening tips.

Country of Origin: Japan